I forgot my Wi-Fi router password. Where to get the password to connect wifi

How can I recover my password from WiFi networks, if you forgot it? It happens that you set up home Wi-Fi network (or someone set it up for you), naturally the network should be password-protected so that cunning neighbors cannot use the Internet via Wi-Fi for free, but after a while the password is forgotten, and the piece of paper on which it was saved is lost. Naturally, when you try to connect a new device, it will ask for a password, but since you forgot it, then of course nothing will work. Therefore, in this article I will help you restore it.

There are 3 ways to find out forgotten password from your WiFi. View the saved password on a Windows computer, in the settings of the router itself, or in the configuration files of an Android smartphone.

View Wi-Fi password in computer settings

This method applicable for Windows Vista and Windows 7.

• Need to go to "Start" - "Control Panel" - Network and Sharing Center shared access» . In the menu on the left, open the item "Wireless Network Management"
• We see the name of our network there, right-click on it and select "Properties", then go to the tab "Safety".
• Check the box “Display entered characters” and we are glad that you can see your password.

You can also find out the password in the settings of the WiFi router itself.

You need to go to the interface of your Wi-Fi router, usually you need to type 192.168.0.1 or 192.168.1.1 in the address bar of your browser. The system will ask for a login and password. If they have not been changed, then the standard ones will do. admin - admin or admin - 1234. There in the section Wireless security You can see your password.

If you do not know the router password, then only a factory reset will help you. All devices have a special button to do it. If you hold down this button for 10-15 seconds (you may need a knitting needle or any other thin object), the router will reset to the initial state and you will have to configure it again, accordingly your password will be deleted

I'll show you how to quickly find out the password for your Wi-Fi. There's nothing wrong with forgetting it. This situation very often occurs among ordinary users. Finding a way out of it is very easy, especially if you are connected to Wi-Fi from any device. Even if you do not have access from devices, you can still find out this information.

I will demonstrate 5 ways to find out:

1. When connected to Wi-Fi.
2. When disabled.
3. In the router settings.
4. Using the program.
5. On an Android mobile device.

The password cannot be found out only if you have changed and forgotten the authorization data in the router settings and you do not have devices that have connected to your Wi-Fi at least once. In this case, you will have to make the settings again.

All actions require administrator rights.

Find out the password in Windows 7, 8 on your computer

If Wi-Fi is connected

On the right and bottom, in the corner of the desktop, find the icon like in the image below and click on it. Then highlight your network ( inscription connected). Go to its properties in the context menu.

By selecting the “Security” tab, enable the display of input icons and the asterisks will be replaced. The network security key string is the password.

If there is no icon, then right-click on an empty space in the lower right panel, then select “Customize notification icons” from the list. Then select “Show icon and notifications” as in the image below.

If Wi-Fi is disabled

This method will work if you have logged into Wi-Fi from the device at least once. The fact is that Windows remembers the Wi-Fi that you logged into. This is done for automatic login so that you do not have to enter data every time.

To see them, go to Start >> Control Panel. Select browse by category and go to the network and internet.

Then go to Network and Sharing Center.

Then go to manage wireless networks.

All networks you have logged into will be displayed here. Select the one you need and go to properties in the context menu.

Go to the security tab and check the box “Display input icons” as shown below. This is the Wi-Fi password.

Instead of these steps, you can use the program. More on this below.

Find out the password using the program

The most popular and convenient program for this it is WirelessKeyView. Download it from the official website and. No installation required. Just run the downloaded file.

The antivirus can detect the threat. This is because the program accesses passwords. So turn it off for now.

After launch, a window will appear in which the password will be displayed ( in the right column).

If the methods above do not suit you, then there is a universal solution. View the password in the router interface.

Find out the password through the router

Go to settings.

If Wi-Fi is not connected, then connect the router to the computer via a network cable; it is almost always included in the kit.

To do this, enter the IP address in the browser line. You can see it on the box itself, usually located at the bottom. I'll show an example on D-link.

1. Login: admin
2. Password: admin

If during initial setup this data was changed and you don’t remember it, then only resetting the settings will help.

Then go to Wi-Fi >> Security. Here you will see the PSK encryption key. This is your Wi-Fi password. It may be different for you, since everyone’s device is different, but the actions are similar. Look for similar items.

Find out the password on Android mobile devices

This method is suitable for both phones and tablets. The main condition is that you log into Wi-Fi at least once.

You will need superuser rights ( root). There is no way without this.

If you have them, then follow these steps:

1. You can download special application which will show the password ( for example, WiFi Key Recovery). Do this and run it.
2. You can view it through the file manager ( for example, total commander). Open it and follow the path /data/misc/wifi and in this folder find the file wpa_supplicant.conf. Open it with a text editor ( for example QuickEdit) and there find the line with the value psk. This is the network password.

If something doesn’t work out, ask a question in the comments.

How did you find out your Wi-Fi password?

Probably everyone has had the experience of forgetting the password for the WiFi network they previously connected to. After reading this article, this will no longer be a problem for you. Because here we have collected everything possible ways recovering forgotten passwords.

How to view a forgotten WiFi password in system settings

If you have forgotten your WiFi password, you can always look at the saved passwords on your computer. By default, Windows saves passwords for all WiFi networks it connects to. Therefore, it is likely that the password you need will be stored in the system settings and you will be able to retrieve it from there.

In order to view the forgotten WiFi password in the system settings, you need to open the “Network and Sharing Center”. The easiest way to do this is using the WiFi icon on the taskbar. Right-click on it and select “Network and Sharing Center.”

You can also open the Network and Sharing Center through the Control Panel. To do this, open the “Control Panel”, and then go to the “View network status and tasks” section.

After opening the Network and Sharing Center, you need to open the Manage Wireless Networks section, the link to which is in the left side menu.

After this, you should see a list of WiFi networks to which you connected. In order to view a forgotten WiFi password, you need to right-click on the desired network and open “Properties”.

The Properties window should now open in front of you. wireless network" In this window, you need to go to the “Security” tab and check the box next to the “Display entered characters” function. After this, your forgotten Wi-Fi password will appear in the “Network Security Key” text field.

Quite often, users are faced with the fact that they do not have a link to “Manage wireless networks” in the “Network and Sharing Center”. If you have the same situation, then you can look up your forgotten Wi-Fi password in another way.

Click on the Wi-Fi network icon on the taskbar. In the window that opens, find the Wi-Fi network you need, right-click on it and open its properties. After this, you will be able to view your forgotten password as described above.

The only negative is that this method only works when you are within the coverage radius of the Wi-Fi network for which you want to find out the password.

How to find out a forgotten WiFi password using WirelessKeyView

If the method described above for recovering forgotten passwords for some reason does not work for you, then you can try using the WirelessKeyView program.

The main purpose of the program is to view saved WiFi passwords. The program developers claim that the program works with everyone Windows versions, starting with Windows XP. Moreover, the program is completely free, and you can.

To find out your forgotten WiFi password, just run this program on your computer with administrator rights. After this, the program will display a list of WiFi networks, information about which is saved on the computer. The password for the WiFi network can be viewed in the “Key (Ascii)” column.

If necessary, you can copy the password. To do this, right-click on the desired WiFi network and select “Copy Key (Ascii)”.

How to look up a forgotten password on a router

If you have access to the router settings, then you can view the password through the router. To do this, open any browser and enter .

As a result, you should be taken to the router's web interface. Here you need to find the section with Wi-Fi network settings. In this section you can view your forgotten password.

How to recover a forgotten password using an Android device

Another way to recover a forgotten password is Android smartphone or tablet. This method can be used if Android device the saved password remains and you have ROOT rights.

To recover a forgotten password, simply download and run. This application will display information about all Wi-Fi networks to which the Android device has ever connected.

You can also view information about saved Wi-Fi networks manually. To do this, open the “wpa_supplicant.conf” file, which is located in the “data/misc/wifi” folder.

If you open this file using any text editor, then you can get all the information about saved Wi-Fi networks.

Situations where users forget passwords for wireless networks occur quite often. The reasons for this may be different, but in any case the question arises: what to do in such a situation? Of course, it is always preferable to “tackle” the problem yourself rather than calling a specialist.

If you are faced with such a situation, then this article is for you. But even if such a nuisance has bypassed you so far, it would be useful to study this issue well in order to be able to figure it out if necessary.

First of all, it should be noted that two different situations with forgotten passwords are possible:

1. The computer is connected to wi-fi networks, but I forgot the password for it - I can’t connect other devices. This option is the most common.
2. There is a wi-fi access point, there are no computers connected to it, and the password is forgotten - you need to remember (recover) it in order to connect the devices. This may occur, for example, after formatting the computer, when passwords stored in the system are erased.

Let's consider each of these situations separately (what to do if you forgot your Wi-Fi password)

In the first case, when the computer is connected to a wi-fi network, this means that the password for it is in the operating system. There are several ways to find it.

Method 1

Through the Network and Sharing Center. You can get into it by right-clicking on the icon wi-fi connections in the notification area:

There is another opportunity to do the same: through the Control Panel - Network and Internet section:
Next, you need to find the desired Wireless network to which the computer is connected and look at its Properties. Let's make a reservation right away: there may be slight differences between different versions of Windows. In some versions, the desired network is displayed immediately, in others, in order to see it, you need to additionally go to Change adapter settings. In any case, finding your wireless connection should not be difficult:

Going to Wireless Network Properties, on the Security tab, find the required password. True, at first just dots are displayed; to see the symbols, you need to tick the box “Display entered characters”:

Method 2

Via the command line (console). For it to be displayed, you need to type cmd in the Windows search bar (or in the “Run” line). Next, having found the command line, you should run it as an administrator (via the right mouse button). The entire sequence of actions is shown in the screenshots below:

When command line will start, you should enter the following into it:

netsh wlan show profiles……. key=clear (where instead of an ellipsis - the name of the network).

Press Enter and a window opens that displays all the parameters of the wi-fi connection, including the security key (password):

Method 3

Using a small utility called WirelessKeyView. There is no need to install it on your computer; you just need to run it as an administrator - and the passwords for all networks to which the computer has ever connected will be displayed. The networks are arranged in alphabetical order, and it is easy to find your current Internet connection among them:

The utility is completely free, has separate versions for 32 and 64 bit systems, it is easy to find and download on the Internet. While it is running, it is advisable to disable the antivirus, since it may react nervously to viewing passwords hidden in the system.

As you can see, all three methods are quite simple and allow you to find the password for the network to which the computer is connected without any problems.

Now let's look at the second case, when there are no computers connected to the wi-fi network, but you need to find the password for it. In such a situation, you will need to connect the Wi-Fi device to the computer using a cable, and then enter its settings through any Internet browser (for example, Google Chrome).

The fact is that each router has its own network address (IP address), through which you can access its settings.

Typically, this is one of the following combinations:

Typically, the router's IP address is indicated on its bottom, either on the box or in the instruction manual. If you haven't found it, you'll have to go through the above combinations.

Next, an authorization window opens to administer the modem (router) settings. By default, if no one has changed the parameters, the login is admin and the password is admin. The screenshots below show this procedure using the example of Tenda and D-Link routers:

[If the authorization data (login and password) have been changed, and you don’t remember them either, then you will have to first reset the device settings (Reset button), and only then proceed to further actions. The password will also be reset, and you will have to come up with and enter a new one].

After authorization, all parameters and settings of the router (modem) open. It should be noted that the interface and settings items may differ quite significantly depending on the model of the Wi-Fi device. In addition, not all models have Russian in the settings. That's why universal method, the same in all cases, does not exist here.

You may also be interested in learning how to find out the wifi password on your computer. To do this, it is worth reading the contents of this article.

Also, for those who consider themselves an “advanced” user, it’s worth knowing how to take a screenshot on a laptop.

And for those who want to learn about how to take a screenshot on a computer, it is worth reading the contents of this article.

In any case, the password (security key) should be looked for in sections such as: Wi-Fi, Wireless, Security, Security Settings, Network Security, Security Setup, Security Settings. In the screenshots below you can see that in the Tenda router the security key is displayed immediately after entering the settings and authorization. As for the D-Link router, in order to see the password, you need to go to Advanced settings - Wi-Fi - Security settings:

It will also be interesting to know what to do if the play market does not work. To do this, it is worth reading the contents of this article.

As you can see, this task is not particularly difficult: after following these steps, you can go into the modem settings without any problems and find the password for your network. If necessary, you can change this password here. It only remains to add that you should under no circumstances change other network parameters without having the appropriate knowledge in this area, otherwise this may cause problems in the operation of the wi-fi connection.

If earlier people did without a wifi router, since their house had only one desktop computer to access the Internet, today every apartment has at least three various devices with this function. In order not to connect access to the World Wide Web on each of them, it is more expedient, more convenient and cheaper to use a router that will distribute the signal to all gadgets. The main problem with them is the situation when the user has forgotten the wifi password, but needs to connect an additional device to the wireless network.

Password recovery using the operating system

Most users of personal computers and laptops have an operating system installed Windows system, with which you can recover your wifi password quickly and without calling a professional technician. Such specialists have inflated tariffs even for such services, so for many optimal solution will use its own resources.

To recover your password, you must use any desktop computer or laptop connected to a wireless network. It is necessary on it.

1. Go to Start.
2. Go to the “Control Panel”.
3. Open the “Network and Internet” section.
4. Open the “Network and Sharing Center” subsection.
5. In the list of items on the left, you must select “Manage wireless networks.”
6. Find your wifi connection.
7. Call the context menu by right-clicking and go to “Properties”.
8. In the window that opens, go to the “Security” tab and check the box “Display entered characters.”
9. After this, you will see your password in the “Network Security Key” window, and you can subsequently uncheck or leave the checkbox.

To avoid forgetting your password later and remembering how to recover it, you can write down the combination on a piece of paper or in a notepad.

If you have forgotten your wifi password, you can do more in a simple way and do not go through a long path of various sections and tabs. To do this, you need to open the menu of available connections on the taskbar, which is located at the bottom. On the right side you need to find the monitor icon or wifi signal and click on it with the left mouse button. A small window will open in which you can immediately call up the “Properties” item by right-clicking on the current connection, or directly go to the “Network and Sharing Center” using the appropriate link.

Restoring the security key in the router settings

If for some reason you cannot restore a combination of symbols through Windows tools, but the question of how to find out the wifi password is still relevant, you can refer to the web interface of the router. In it you can see the status of the device itself and the wireless network, as well as make all the necessary settings for using the Internet. This method can also be used in cases where there is no device connected to the router via a wireless network.

To view your wifi password, you need to log into any browser on a computer connected to the router network cable. Regardless of the router model or Internet provider, you must enter the combination “192.168.1.1” or “192.168.0.1” in the address bar; “192.168.100.1” is suitable for some devices. By going to this address, you will see fields for entering your login and password, but this combination does not apply to your Internet connection. If you have not made any changes, then in most cases you will need to enter the word “admin” in both fields. If it doesn’t work, look at the bottom panel of the router, where there is a sticker with its exact IP address and access combination.

On routers Asus password displayed on home page we-interface, in the configurators of other models you will have to go to the correct section. If all the items are written in Russian, you need to find the “Network” or “Wireless Connection” section, and then go to the “Security” tab, where you can see the forgotten password. If English is enabled in the web interface, you need to focus on the “WLAN” or “Wireless” section, and the security key will be indicated in the “Security” tab in the “PSK” or “Password” line.

Recovering the access code by the program

At the moment, not only large specialized companies, but also private craftsmen are developing all kinds of software for computers, so you can find a program for almost any purpose. Wifi password recovery was no exception; there is a WirelessKeyView program for this.

When using it, the question of how to find out a forgotten password will disappear very quickly, since it will display all the combinations that have ever been used to connect to a wireless network on this computer. WirelessKeyView is distributed free of charge; you just need to download it from the official website and run it as an administrator without prior installation.